Código EAN8595568932358
Elcodigo aduanero85363030
Peso0.06 kg/pcs
MaterialPP + foaming material
Material libre de halógenosyes
Material sin plomoyes
Autoextinguible30 sec.
Voltaje nominal<= 400 V
Corriente nominal<= 16 A
Resistencia térmica-5 - 60 °C
Ensayo de hilo incandescente850 °C
Ancho73 mm
Altura68 mm
Profundidad47 mm
Diámetro de orificio fresado (perforado)73 mm
Recomendaciones del fabricante
For all range of products in hollow walls, we recommend using the milling sets supplied by us.
Clase de reacción al fuegoA1 - F
Clase de protecciónIP30
Corresponde a las normasČSN EN 60 670-1, ČSN EN 1363-1:2013
Estándares de resistencia al fuegoEI 15 - EI 120

Note for system with maintained functionality in fire:
Fire resistant wall box KPZ-1_PO is designed for fire partition walls, consisting of fire resistant gypsum plasterboard or aerated concrete structures. Its advantage is that the inlet openings are made of a softened material that ensures airtightness of the passage between the box and the cable or tube installed therein. On the outside and inside of the box is applied foaming material, which in case of fire foams the mounting hole. This ensures the integrity and insulation fire partitions in place of location devices. Its use thus prevents the spread of fire in the event of fire. The triple-threaded mounting screws are provided with metal feet for quick installation. Application of this box is mainly in buildings with increased need for protection of persons and property in case of fire.

The PO classification is dependent on the specific placement of the box in plasterboard or aerated concrete, detailed in the new catalog – Systems with maintained functionality in fire.

Currently there are no products
Currently there are no products