KO180LD_EN
| Código EAN | 8595568932600 |
| Elcodigo aduanero | 39259080 |
| Peso | 0,31 kg/pcs |
| Material | PVC |
| Material sin plomo | yes |
| Insonorización | yes |
| Autoextinguible | 30 s |
| Voltaje nominal | <= 500 V |
| Corriente nominal | <= 16 A |
| Resistencia térmica | -5 - 60 °C |
| Ensayo de hilo incandescente | 850 °C |
| Ancho | 193 mm |
| Altura | 153 mm |
| Profundidad | 72 mm |
| Diámetro de orificio fresado (perforado) | 40 mm |
| Recomendaciones del fabricante For all range of products in hollow walls, we recommend using the milling sets supplied by us. | |
| Clase de reacción al fuego | A1 - F |
| Clase de protección | IP 30 |
| Corresponde a las normas | ČSN EN 60 670-1 |
| La descripción del embalaje installed mounting screws and feets, inserted stainless steel screws for fixing the lid, individual boxes together with the lid sealed in shrink foil | |
Possibility of installing the TS 35 support rail. On the outside of the bottom of the box, tips indicate the drilling points. Possibility of marking the hole for installation using protrusions on the rim of the box. Inlet openings made of flexible material. The cable or pipe is installed by tearing out the pre-pressed inlet on the flexible membranes and inserting the cable or pipe into the created hole. Ensured airtightness of the passage even when the cable or pipe is inserted. Prevents airflow through installations. Suitable for low-energy or passive houses. It is not necessary to countersink the edge of the plasterboard during installation. Mounting screws have a double thread for quick installation. Protected by a European industrial design trademark. The lid for the box can be purchased separately as a spare part V 180_HB.
